org.bukkit.generator

接口 ChunkGenerator.ChunkData

封闭类:

ChunkGenerator

public static interface ChunkGenerator.ChunkData

Data for a Chunk.

方法概要

限定符和类型	方法和说明
byte	getData(int x, int y, int z) 已过时。 Uses magic values
int	getMaxHeight() Get the maximum height for the chunk.
Material	getType(int x, int y, int z) Get the type of the block at x, y, z.
MaterialData	getTypeAndData(int x, int y, int z) Get the type and data of the block at x, y ,z.
int	getTypeId(int x, int y, int z) 已过时。 Uses magic values
void	setBlock(int x, int y, int z, int blockId) 已过时。 Uses magic values
void	setBlock(int x, int y, int z, int blockId, byte data) 已过时。 Uses magic values
void	setBlock(int x, int y, int z, Material material) Set the block at x,y,z in the chunk data to material.
void	setBlock(int x, int y, int z, MaterialData material) Set the block at x,y,z in the chunk data to material.
void	setRegion(int xMin, int yMin, int zMin, int xMax, int yMax, int zMax, int blockId) 已过时。 Uses magic values.
void	setRegion(int xMin, int yMin, int zMin, int xMax, int yMax, int zMax, int blockId, int data) 已过时。 Uses magic values.
void	setRegion(int xMin, int yMin, int zMin, int xMax, int yMax, int zMax, Material material) Set a region of this chunk from xMin, yMin, zMin (inclusive) to xMax, yMax, zMax (exclusive) to material.
void	setRegion(int xMin, int yMin, int zMin, int xMax, int yMax, int zMax, MaterialData material) Set a region of this chunk from xMin, yMin, zMin (inclusive) to xMax, yMax, zMax (exclusive) to material.

方法详细资料

getMaxHeight

int getMaxHeight()

Get the maximum height for the chunk. Setting blocks at or above this height will do nothing.

返回:

the maximum height

setBlock

void setBlock(int x,
              int y,
              int z,
              Material material)

Set the block at x,y,z in the chunk data to material. Note: setting blocks outside the chunk's bounds does nothing.

参数:

x - the x location in the chunk from 0-15 inclusive

y - the y location in the chunk from 0 (inclusive) - maxHeight (exclusive)

z - the z location in the chunk from 0-15 inclusive

material - the type to set the block to

setBlock

void setBlock(int x,
              int y,
              int z,
              MaterialData material)

Set the block at x,y,z in the chunk data to material. Setting blocks outside the chunk's bounds does nothing.

参数:

x - the x location in the chunk from 0-15 inclusive

y - the y location in the chunk from 0 (inclusive) - maxHeight (exclusive)

z - the z location in the chunk from 0-15 inclusive

material - the type to set the block to

setRegion

void setRegion(int xMin,
               int yMin,
               int zMin,
               int xMax,
               int yMax,
               int zMax,
               Material material)

Set a region of this chunk from xMin, yMin, zMin (inclusive) to xMax, yMax, zMax (exclusive) to material. Setting blocks outside the chunk's bounds does nothing.

参数:

xMin - minimum x location (inclusive) in the chunk to set

yMin - minimum y location (inclusive) in the chunk to set

zMin - minimum z location (inclusive) in the chunk to set

xMax - maximum x location (exclusive) in the chunk to set

yMax - maximum y location (exclusive) in the chunk to set

zMax - maximum z location (exclusive) in the chunk to set

material - the type to set the blocks to

setRegion

void setRegion(int xMin,
               int yMin,
               int zMin,
               int xMax,
               int yMax,
               int zMax,
               MaterialData material)

Set a region of this chunk from xMin, yMin, zMin (inclusive) to xMax, yMax, zMax (exclusive) to material. Setting blocks outside the chunk's bounds does nothing.

参数:

xMin - minimum x location (inclusive) in the chunk to set

yMin - minimum y location (inclusive) in the chunk to set

zMin - minimum z location (inclusive) in the chunk to set

xMax - maximum x location (exclusive) in the chunk to set

yMax - maximum y location (exclusive) in the chunk to set

zMax - maximum z location (exclusive) in the chunk to set

material - the type to set the blocks to

getType

Material getType(int x,
                 int y,
                 int z)

Get the type of the block at x, y, z. Getting blocks outside the chunk's bounds returns air.

参数:

x - the x location in the chunk from 0-15 inclusive

y - the y location in the chunk from 0 (inclusive) - maxHeight (exclusive)

z - the z location in the chunk from 0-15 inclusive

返回:

the type of the block or Material.AIR if x, y or z are outside the chunk's bounds

getTypeAndData

MaterialData getTypeAndData(int x,
                            int y,
                            int z)

Get the type and data of the block at x, y ,z. Getting blocks outside the chunk's bounds returns air.

参数:

x - the x location in the chunk from 0-15 inclusive

y - the y location in the chunk from 0 (inclusive) - maxHeight (exclusive)

z - the z location in the chunk from 0-15 inclusive

返回:

the type and data of the block or the MaterialData for air if x, y or z are outside the chunk's bounds

setRegion

@Deprecated
void setRegion(int xMin,
                           int yMin,
                           int zMin,
                           int xMax,
                           int yMax,
                           int zMax,
                           int blockId)

已过时。 Uses magic values.

Set a region of this chunk from xMin, yMin, zMin (inclusive) to xMax, yMax, zMax (exclusive) to block id. Setting blocks outside the chunk's bounds does nothing.

参数:

xMin - minimum x location (inclusive) in the chunk to set

yMin - minimum y location (inclusive) in the chunk to set

zMin - minimum z location (inclusive) in the chunk to set

xMax - maximum x location (exclusive) in the chunk to set

yMax - maximum y location (exclusive) in the chunk to set

zMax - maximum z location (exclusive) in the chunk to set

blockId - the block id to set the blocks to

setRegion

@Deprecated
void setRegion(int xMin,
                           int yMin,
                           int zMin,
                           int xMax,
                           int yMax,
                           int zMax,
                           int blockId,
                           int data)

已过时。 Uses magic values.

Set a region of this chunk from xMin, yMin, zMin (inclusive) to xMax, yMax, zMax (exclusive) to block id and data. Setting blocks outside the chunk's bounds does nothing.

参数:

xMin - minimum x location (inclusive) in the chunk to set

yMin - minimum y location (inclusive) in the chunk to set

zMin - minimum z location (inclusive) in the chunk to set

xMax - maximum x location (exclusive) in the chunk to set

yMax - maximum y location (exclusive) in the chunk to set

zMax - maximum z location (exclusive) in the chunk to set

blockId - the block id to set the blocks to

data - the block data to set the blocks to

setBlock

@Deprecated
void setBlock(int x,
                          int y,
                          int z,
                          int blockId)

已过时。 Uses magic values

Set the block at x,y,z in the chunk data to blockId. Setting blocks outside the chunk's bounds does nothing.

参数:

x - the x location in the chunk from 0-15 inclusive

y - the y location in the chunk from 0 (inclusive) - maxHeight (exclusive)

z - the z location in the chunk from 0-15 inclusive

blockId - the blockId to set the block to

setBlock

@Deprecated
void setBlock(int x,
                          int y,
                          int z,
                          int blockId,
                          byte data)

已过时。 Uses magic values

Set the block at x,y,z in the chunk data to blockId. Setting blocks outside the chunk's bounds does nothing.

参数:

x - the x location in the chunk from 0-15 inclusive

y - the y location in the chunk from 0 (inclusive) - maxHeight (exclusive)

z - the z location in the chunk from 0-15 inclusive

blockId - the blockId to set the block to

data - the block data to set the block to

getTypeId

@Deprecated
int getTypeId(int x,
                          int y,
                          int z)

已过时。 Uses magic values

Get the blockId at x,y,z in the chunk data. Getting blocks outside the chunk's bounds returns 0.

参数:

x - the x location in the chunk from 0-15 inclusive

y - the y location in the chunk from 0 (inclusive) - maxHeight (exclusive)

z - the z location in the chunk from 0-15 inclusive

返回:

the block id or 0 if x, y or z are outside the chunk's bounds

getData

@Deprecated
byte getData(int x,
                         int y,
                         int z)

已过时。 Uses magic values

Get the block data at x,y,z in the chunk data. Getting blocks outside the chunk's bounds returns 0.

参数:

x - the x location in the chunk from 0-15 inclusive

y - the y location in the chunk from 0 (inclusive) - maxHeight (exclusive)

z - the z location in the chunk from 0-15 inclusive

返回:

the block data value or air if x, y or z are outside the chunk's bounds